Integriti Access Controller (IAC) Overview
Overview
The Integriti Access Controller (IAC) is an IP-based Enterprise Access Controller designed for advanced access control and security monitoring. It serves as a central hub for managing doors, readers, and expansion modules within the Integriti ecosystem.
Technical Details
- Architecture: Multi-controller architecture allowing integration of multiple IACs and ISCs (Integriti Security Controllers) into a globally managed system.
- On-board Capacity:
- 2 Doors (expandable).
- 2+2 Wiegand Reader inputs.
- 1 RS485 LAN Reader port (supports up to 16 SIFER or OSDP readers).
- Expansion: Supports up to 240 additional doors via RS485 LAN and local cabinet expansion via UniBus Expansion.
- Reporting: Supports SkyTunnel and Multipath-IP reporting.
- Compatibility: Integriti Software Version 4.3.6 or later.
Configuration / Programming
- Default Installer PIN:
01. - Initialization: Use the
IN1-IN3andOKlinks on the PCB for defaulting or initialization. - Smart Card: Shipped with ‘IAC Level 0’ license (16 Doors, 100 Zones, 10,000 Users).
Troubleshooting
- Panel Status: Indicated via Fault 1/Fault 2 and Status 1/Status 2 LEDs.
- Initialization Issues: If NVRAM is not initialized, check the “Prompt” LED and short the “OK” link.